1. Home
  2. Installation
  3. 👁‍🗨 Installation Guide Wingfield Box

Connect the Wingfield Box to the Internet (3/4)

Let's get the Wingfield Box online. 🟢


📍Here you are in the installation process.



 

🛠️ In this step, you will need the following:

  • Wingfield Box Power Cable

⚡️Power cable: Remove the cap from the power connector. Use the supplied power cable (15m) or a cable you have prepared and connect it to the Wingfield Box. Give the box a few seconds to wake up.

Schritt 1 Strom

⚠️ Internet connection: Select the instructions that apply to you!

1) Cabling of a Wingfield Box without Baseline Camera

All Wingfield Boxes delivered from April 2023 have an integrated WLAN module. You can decide whether to operate your Wingfield Box via WIFI or LAN.

We always recommend a stable cable connection from your router to the Wingfield Box. If you prefer this method, follow the next steps. Otherwise, continue directly with the configuration of your Wingfield Box.

🛠️ In this step, you will need the following:

  • Waterproof attachment for the LAN cable (you will find it in the bag with the installation accessories for the Wingfield Box Brain).
  • Your own LAN cable that you run from your router to the Wingfield Box

⚠️ Attention: As distances from the router to the Wingfield Box may vary greatly, this cable is not part of our standard delivery! It should be of CAT6a quality or better to ensure fast data transmission.

The network connection of the Wingfield Box has a waterproof attachment. We recommend attaching the supplied counterpart to the LAN cable leading to the Wingfield Box. Be sure to connect the parts of the attachment correctly to your cable (see illustration/video).

💡 Tip: If necessary, remove the small rubber tab above the "click mechanism" of your LAN cable to facilitate installation.

Start the configuration mode on the Wingfield Box

As soon as your Wingfield Box is connected to your power supply, it will automatically boot up and start the configuration mode. Connect it to your WIFI network.

⚠️ Attention: If the Wingfield Box cannot connect to the Internet, you will find possible reasons and options for action in this article.

➡️ No internet connection at the Wingfield Box

 
 

 

Installation Guide🔧

Nearly done! 🎉 We will guide you step by step through the installation of your Wingfield Box:

➡️ Continue with step 4: Calibrate the Wingfield Box


 

Bildschirm­foto 2022-12-08 um 11-36-00-png

You are standing on the court and don't know what to do? We are here for you!

📞 Service hotline: +49 (0) 511 51525901
💬 WhatsApp:  click here
📨 E-Mail:
 service@wingfield.io


2) Cabling of a Wingfield Box with Baseline Camera

A single Wingfield Box with a Baseline Camera can only be operated via a LAN connection to your router.

🛠️ In this step, you will need the following:

  • Waterproof attachment for the LAN cable (you will find it in the bag with the installation accessories for the Wingfield Box Brain).
  • 1m LAN cable (you will find it in the bag with the installation accessories for the Wingfield Box Brain)

The interface between your Wingfield Box, your Baseline Camera, and your router is the PoE switch included in the scope of delivery of your your Baseline Camera.

Switch Packages-jpg-1

If you are only setting up a single Wingfield Box with a Baseline Camera, we recommend that you always stow the PoE switch in the housing of the Wingfield Box (you will find instructions on how to attach it later in the assembly instructions for the Baseline Camera). Using the short LAN cable (1m) from the Wingfield Box Brains installation kit is best to connect the Wingfield Box directly to your switch.

The network connection of the Wingfield Box has a waterproof attachment (see picture). We recommend that you attach the supplied counterpart to the short LAN cable. Make sure you plug the parts of the attachment onto your cable in the correct order (see illustration/video).

 

💡 Tip: If necessary, remove the small rubber tab over the "click mechanism" of your LAN cable to make installation easier (see video).

Schritt 2 Lan

Remove the twist lock on the left-hand side of the processor to expose the network connection. Plug the prepared network cable to the switch into the connection provided and screw the lock in place.

Schritt 3 Anschluss

Now connect your router to your PoE switch via LAN cable so that the setup of your Wingfield Box can be completed and you can get straight to work on your Baseline Camera.

⚠️ Attention: As distances from the router to the Wingfield Box may vary greatly, this cable is not part of our standard delivery! It should be of CAT6a quality or better to ensure fast data transmission.

Start the configuration mode on the Wingfield Box

As soon as your Wingfield Box is connected to your power supply, it will automatically boot up and start the configuration mode. Select the connection via LAN cable and wait until a connection has been established.

⚠️ Attention: If the Wingfield Box cannot connect to the Internet, you will find possible reasons and options for action in this article.

➡️ No internet connection at the Wingfield Box

 
 

 

Installation Guide🔧

Nearly done! 🎉 We will guide you step by step through the installation of your Wingfield Box:

➡️ Continue with step 4: Calibrate the Wingfield Box


 

Bildschirm­foto 2022-12-08 um 11-36-00-png

You are standing on the court and don't know what to do? We are here for you!

📞 Service hotline: +49 (0) 511 51525901
💬 WhatsApp:  click here
📨 E-Mail:
 service@wingfield.io